WELCOME BABY CARD

Hello friends,

It's Anita Kejriwal here and today I have a new baby card for you. I  love making cards for babies especially baby girls. There are some extremely beautiful dies in baby theme at the CottageCutz store. You will really love them .

To make this card, follow these instructions.

1. Cut the card base with white cardstock to the size 10 inches by 7 inches. 

Score on the 5inch mark on the 10 inch side. Fold. 

The card size measure 7 inches by 5 inches.

2. Cut a mat layer with another white cardstock measuring 6.75 inches by 4.75 inches.

Ink the edges with Memento Angel Pink ink colour and adhere to the card front.

3. Cut a pattern paper in baby theme measuring 6.5 inches by 4.5 inches and adhere to the card.

4. Cut out a piece in white cardstock from the CottageCutz Stitched Rectangle ( basics) die and emboss it in the baby theme embossing folder.

Apply Memento Angel Pink  ink all over. 

Adhere this onto a pink cardstock  leaving approximately 4mm around the edge. 

Attach on to the card using foam tape. Add a ribbon.

5. Cut out three pieces in white cardstock from the CottageCutz Horse and Carriage die

Stick the pieces together. This gives the look of thick chipboard. 

Apply glossy accents and sprinkle Distress Clear Rock Candy Glitter on top. 

Adhere with foam tape on the card.

I have cut out a small teddy from the CottageCutz Baby Girl Clothes die and coloured it pink. 

This I stuck this teddy inside the carriage window. 

Finish the card with stamped baby sentiment and some ribbon.

There are lot of baby theme dies that are so adorable at the store.

Please do go through them.

 I do hope you liked my card. Please do leave your comments. 

Thanks for stopping by. Have a great weekend and Happy Crafting !!

 

 

Tags with Cupcakes

Hi, Vladka here! Today I have these fun and happy tags for you. It is really easy to create them. So, let's start!

For two tags you will need the following supplies:

CottageCutz Dies: Listed Below
White cardstock for tag base
Additional piece of white cardstock to cut out the die cuts
Inks: Fired Brick Distress Ink and red dye ink for stamping
Other: paper trimmer, Sizzix machine, water, sheet of acetate, some sentiment stamps and polka dot stamp or polka dot pattern paper

Let’s prepare tag bases first! 

1. With Stitched Rectangle die cut two second biggest squares (seventh from the center).
2. With Rectangle die cut two third biggest squares (sixth from the center).
3. And now my favorite "smooshing" technique again :) Add some Fired Brick Distress Ink on acrylic block and spritzed some water on it. Then take a piece of plastic acetate and gentle pressed it against the block to pick up some of the ink. Now, press the plastic to smaller square to transfer the ink. This will give you a splotchy look. Do the same with second smaller square. Let dry.

Now, let's put Cupcakes together:

With Stitched Cupcake die cut both cupcakes out of some white cardstock. With polka dot stamp and red ink, stamp on both cupcake bottoms, on the heart and cherry. If you don't have such stamp, cut all these pieces out of polka dot pattern paper. You can also find free sample on internet. All you need to do is to print it with your printer. Now put all cupcake pieces together and glue one on each of the tags. For a finishing touch, stamp some sentiments and make the small hole on the top of both tags and put some string through them.

Such tags can be part of the presents or they can be used instead of cards or if you have guests, they can be part of the decoration.

Have fun creating!

Flower Thanks

 

Hello CottageCutz Fans! Thanks for taking the time to visit with The Scrapping Cottage Blog. It's Mary Marsh here with the Wednesday edition of the blog.

For my card this week, I have created a thank you card with several different dies from CottageCutz. My idea was to create a leaf frame with a flower surrounding it. So let's get started with the details of how this card is put together.




 

I started off my card with some background stenciling. I chose a diamond patterned stencil and some light green ink. Using a sponge dauber I sponged the pattern  onto my cardstock going both darker and lighter.

My next step was to create my leaf frame. I did that with the Cottage Cutz Square Set Dies. I used the 3rd and 4th largest dies for my frame. Ran them through my die-cutting machine and the next photo shows the frame that I ended up with.

 

The open frame is what I used for my card. The smaller square I will use on another project.

 

At this point, I die cut my flower with purple cardstock using the Cottage Cutz 3D Flower #3. The leaves with a light and dark green cardstock using the Cottage Cutz Strawberry Petites die. I layered the leaves around my frame and assembled my flower. My thanks word is from the Cottage Cutz Thanks Die and I cut in the same purple cardstock. I cut it twice and layered for more dimension.

 

Also, to give my flower more dimension, I used foam squares between each layer. This next photo gives a close up view of the flower.

 

 

To complete my card I added a butterfly cut in light pink from the Cottage Cutz Butterfly with Flowers Die and then scattered some candy dots in light pink for added interest. That's it for me for this edition. So until next time........inky hugs!

Card Stock sizes:
Purple Card Base: 4 1/4" x 5 1/2"
Green Layer: 4 1/8" x 5 3/8"
Stenciled Layer: 3 7/8" x 5 1/8"
Leaves: light and dark green cardstock
Butterfly: light pink cardstock
Dies: pictured below

 

 

Sweet tooth bear

Hi, Janja here!
Creating children's cards for me, as grandmother of three little boys, is the greatest joy. Today I am sharing with you a fun birthday card.

For the card base I chose a brown cardstock. The folded card measures: 5.3" x 5.3" (13.5 x 13.5 cm). With a paper cutter, I cut 2 squares, both a little smaller than the size of the card. One from the patterned paper and another from the same cardstock as the base card. 

To make the framed bases, I used the 2 largest dies (from the basic set: stitched square and square) and cut out the openings for the image and that creates a frame. 

For patterned paper I used a die stitching square in the size 3.5" x 3.5" (8.9 x 8.9 cm) and for the brown cardstock, square die in the size 3.3" x 3.3" (8.4 x 8.4 cm). I glued frames to each other so that the edges are aligned.

To begin assembling the card I first applied a script patterned paper centered on my base card front. I applied adhesive foam pads to the back of my double frame and centered it over my patterned paper.

The whole basis of my card is created using dies from the CottageCutz birthday release: stitched cupcake and balloons, which I combined from a previous Christmas release: peeking Santa bear.

Just look at how cute he is, curiously peeking over the cupcakes!

All the cutouts are made with colored cardstock that have the edges shadowed with Distress Inks (Mustard Seed , Wild Honey, Moved Lawn and Vintage Photo).

When card was finished, I applied glitter on the cupcakes and the balloons. I also added white gel pen lines on the balloons for reflections.

I hope you give this adorable card a try and make one for the child in your life!

List of dies used:

Have a nice day!

Janja

ALTERED GIFT BAG WITH ANITA KEJRIWAL

Hello! It's Anita Kejriwal here and I am super excited to begin my first post at the CottageCutz blog. I feel so happy to be a part of this wonderful team and would put my best effort to feature the best of CottageCutz dies.

 

For my first post, I have altered a juice carry bag into a gift bag for a baby. I like to alter many such things and give them a new look. Dies really help to bring out the beauty in my projects.

 

This is a picture of the bag before I altered it.

 

 



Here are the instructions on how to altered the bag:

 

(The bag measures 6.75 x 7 inches)

Remove the green string from both sides and paint the edges with white acrylic paint on both sides of the bag. Cut two red pieces of card stock to 6.5 x 6.75 inches and adhered it to both sides of the bag. Add another layer of pattern paper. Two pieces for front and back measuring 6 x 6 inches. This is adhered on both sides on top of the red card stock.

 

Cut two pieces of die cuts in white card stock from the Cottage Cutz Baby Border (7" long). Distress the edges of this die cut with Candied Apple Distress Ink. Emboss the die Cottage Cutz Bella Floral Frame (Elites) on a piece of white card stock and cut out the frame with scissors. Cut another die cut from the same die and color it well with Candied Apple Distress Ink. Emboss the frame with Twisted Citron Distress Ink. Adhere it on the bottom die as shown.

 

Cut two die cuts in white card stock from the Cottage Cutz Baby Blocks (Elites) and color it with Candied Apple Distress Inks.  Placed on top of each other with double sided foam tape. This gives it a 3D look. Finish the bag with some baby sentiment, flowers and a red button and ribbon.

(I added red and green ribbon as handle.)

 

This is my finished bag and it looks really beautiful after being decorated by CottageCutz dies.

                                           

Do stop by the store to view the amazing collection!

An important tip for die cutting- I always place my dies diagonally on my cutting plate to get smooth cutting in one go.

I hope you enjoyed my first post. Please do leave a comment and your feedback.

I will be back next week with more creative inspiration with CottageCutz dies.

Till then........ happy crafting!!!!!!

Victorian Window with Roses

Hi, Vladka here! Today we will travel back in time with this vintage card. Are you interested in how you can create it? Let's start!

Basics:
Card base: 4 1/4 x 6 inches (cut 4 1/4 x 12 inches, fold in half)
Additional piece of kraft cardstock: 3 3/4 x 5 1/2 inches
Some kraft cardstock scraps to cut out the die cuts and strip for sentiment

Other Supplies:
CottageCutz dies: listed below
Cardstock: kraft cardstock
Distress Ink: Brushed Corduroy, Gathered Twigs, Fired Brick, Aged Mahogany, Peeled Paint
Other:  brick embossing plate (optionally), scissors, paper trimmer, Sizzix machine, scor-buddy, brush, light blue and white watercolor paint from a tube or white acrylic paint, piece of sponge

Let's prepare everything first:

1. With the Victorian Window die cut the window out of some kraft cardstock. Use a sponge to color die cut pieces with white watercolor paint straight from the bottle but you can use white acrylic paint. After they are dry, distress all of them with brown Distress Ink. When putting the window together, tear apart some pieces to give it an old and damaged look.
2. With the Floral Spray die cut flowers and greenery out with some kraft (or white) cardstock. Color flowers with red Distress Inks and greenery with green ink.
3. With Stitched Square die cut the second biggest square (eight from the center). Put it together with the same Stitched Square die on the cutting plate (as shown on the photo) and cut it out again. This will give you the perfect stitched strip to stamp the sentiment on.

4. Run the other piece of kraft cardstock through your die cutting machine with your brick embossing plate. This step is optional. You can use any other embossing plate or none at all. Color the surface gently with blue paint on a sponge first then after it is dry use white paint. For a finishing touch, carefully distress the whole surface with brown Distress Ink.
5. Use white paint on the base of the card as well.

Finally, preparations are finished. Let's make the card!

Apply adhesive on the back side of additional piece of cardstock (the embossed one) and add it on the card base. On the front of the card, glue the window, flowers and greenery. Stamp sentiment on the strip and glue it under the window.

Card is finished and you can enjoy the view :)))

It's Your Day

 

Hello Cottage Cutz Fans! It's Mary Marsh here and I am so excited to be sharing my first post on the blog. I am starting off my term with a masculine birthday card. We all need cards for the guys in our lives and balloon cards are always a winner.

 

I am using the round mini balloon die for this sample. Looks like this die is out of stock right now, but check out this cute balloon variety die that would work as well. So let's get started with the details of how to make this card.

 

cardstock and patterned paper sizes:

red cardstock base measures 4 1/4" x 11" and scored at 5 1/2".

striped patterned paper layer is 4 1/8" x 5 3/8"

embossed yellow layer is 3 3/8" x 4 5/8"

dotted patterned paper is 3 1/8" x 4 3/8"

image panel is 1 7/8" x 3 1/8" and red layering panel is 2 1/8" x 3 3/8"

 

I used double sided tape to secure my panels. The dotted patterned paper is placed on an angle for some card interest. Before the image panel was secured, I added some red burlap ribbon and then some red and white bakers twine over that.

 

Made a mini bow from the same bakers twine and added a sequin center. Even though I am using ribbon on a masculine card, it's burlap and has a masculine appeal to it. Bakers twine is not feminine or frilly so that's ok also.

 

On the yellow embossed panel, I used a birthday words embossing folder.

 

For the image panel, I die cut the balloons in red, yellow and blue to match the colors in the patterned paper. I sponged the edges of the paper with the corresponding inks to give some depth. Stamped the "it's your day" sentiment and added some red sequins to complete my card.

 

I hope this card gave you some inspiration to make a masculine card using these super cute balloon dies. That's it for me for today. So until next time.............inky hugs!

 

 



Happy Spring!

Hello Everyone!

It's Donna here and I am so excited to be here. This is my first post as a design team member. This is going to be so much fun to share with you the CottageCutz dies! For my first post, I am sharing with you a Spring card. Spring is right around the corner, and I don't know about you, I am so ready!!! The die I am using on my card is the “Miss Daisy Spring Bunny” 4x4 die.

Here is how I put my card together!

The base of my card is an A2 (5 ½” H x 4 ¼” W ), I used Regal Rose cardstock by Stampin' Up. I have several layers on this card. The first layers are 4 ¼’ H x 4” W and 5 1/8” H x 3 7/8” W. The square layers are 3 x 3 and 2 ¾ X 2 3/4 and the stripe across the middle of the card is 1”H x 4 ¼ W. The design paper is by Authentique – Springtime.

I cut the elements from the “Miss Daisy Spring Bunny” 4x4 die with cardstock; I used a small sponge to ink the edges and shadows. I used the following colors, which is all Stampin Up cardstock: Bunny cut out of Crumb Cake and used Crumb Cake to ink. The leaves Garden Green, inked with Garden Green, and the flowers are cut out of Daffodil Delight and inked with Daffodil Delight. I used a white gel pen to put in the eyes.

The butterfly, I only used the top layer and I colored it with Copics – R81 and 85 and added some clear Wink of Stella so it looks like it is sparkling.

To assemble my card, I used foam tape to pop up the bunny, pieced the flowers on the greenery and adhered it to my card so that it looks like the bunny is sniffing them. I put foam tape on the butterfly and popped it up on the card. I added my sentiment, and to finish the card I added the button with some floss which was from my stash.

I hope you enjoyed my post today and I have inspired you to check out CottageCutz so you can be creative.  Please come back again soon to check out some more projects made with the CottageCutz dies!