Santa hitching a ride

Happy Friday Scrapping Cottage fans. I really hope you’ve had a good week and are looking forward to the weekend ahead.  Today I’m sharing a simple and fun card with you, I just love the last 2 releases (well I love all Scrapping Cottages dies).

Firstly I took a piece of pale blue card measuring 6” x 4” when folded. I thought it gave the card a winter look. I then took the ‘Hills Slimline’. And cut them twice, one higher than the other so they could be overlayed. I glued the bottom panel but used 1mm foam pads for the next layer. 

I thought it would be nice to add some trees to the background and I used the trees from the ‘Winter House Accessories’ die. I cut them out of white glitter card and it is hard to see but they really glisten

Next I cut out Santa from ‘Santa’s Delivery’ die and all of the elements from the ‘Snowman Reindeer Die’. I cut the car out twice and layered it on top of each other to give it some depth. when you cut the car out,  it cuts the holes for the lights. I stuck a piece of card behind this and them and used some of my large crystal diamantés so they looked like headlights

I then assembled all remaining elements.I left the snowman’s arm until last so that it fit the steering wheel when put together

I attached the car and Santa using 1mm foam pads. Santa looks like he’s hitching a ride but I’m not sure that he’ll fit in the car. He may have to wait for his sleigh. I cut some holly from the ‘Woodland Christmas Set’ to put in the right hand corner out of the same glitter card as the trees and added some diamantés for berries

So here’s the final card. I really hope you like it. I had so much fun putting this together. I wish you a safe and happy weekend with lots if time to craft

Wendy

Dies I used

Christmas Tree Hunting!

Hello Friends,

It is New Release Time!  The collection is Christmas Part 2!  There are are 19 new designs just as adorable as the Christmas Part 1 release.  For a limited time there is 30% off individual dies.  You can check all of these fantastic dies out right HERE!

I am having fun with one of the new release dies today. I am using the Christmas Van w/Bear.  Also I want to mention the CottageCutz You Tube channel is up and running once again. We have new videos every Wednesday. There is a give away this week so please check it out HERE!

Design Steps:

1.  Using the Christmas Van w/Bear die cut the pieces using: red, green, blue, silver, black, white, and brown.  After you cut out the pieces assemble them using a fine tip glue

2.  For the card base use an A2 white card, piece of snow DP 3 x 4 1/4, piece of white cut with the Slimline Waves.  Brown, white and green cut with the Mountain and Tree Slimline.  The road was cut freehand out of black and white card stock

3.  Glue the snow DP to the top of the A2 white card base,  add the mountains and tree line then finally the snow bank and road

4.  Place you van on the road using pop dots and finally stamp and layer your Merry Christmas sentiment and glue it flat to the top left as shown below

CottageCutz Products

Thanks so much for stopping by today!  And don't forget to get those Christmas gifts and cards started early!! We have so may wonderful dies to spark those creative juices!!!

Take Care and Blessings

Pam

Let's Create a Stunning Light-Up Christmas Card

Hi, it's Marla back again with another YouTube tutorial.  Today, I'm excited to share this stunning holy night Christmas card with you today over on the CottageCutz YouTube Channel.  The Nativity Manger Scene die used on this card is what would be considered a silhouette die.  Silhouette dies paired with a beautiful background, such as the one created here, make mass producing stunning Christmas cards a breeze. Rather than stamping a sentiment,  I added the delicate script Peace on Earth die which really compliments the simplistic beauty of this nativity scene. This die is part of the new Christmas Part 2 release and is on sale now for a limited time.

I couldn't stop with the gorgeous layered background. Nope, I added an interactive wow factor to this classic design by pairing these dies with EZ lights from Pear Blossom Press to literally shine the light on this scene.  The name really says it all EZ, because that's what they were. Simply add the battery, poke a few holes and tape your lights in place.  The illumination adds a majestic touch to this manger scene, wouldn't you agree? Adding lights are a perfect compliment to take your CottageCutz scene building cards to a whole new level.

I hope you join me over on the CottageCutz YouTube Channel to see how incredibly easy this card was to create.

BONUS...The Scrapping Cottage is generously giving away the Peace on Earth die to one lucky winner.  Head over to the YouTube Channel to see how to enter this GIVEAWAY.  

Until next time.... Marla

Gingerbread family

Good morning CottageCutz friends, it’s Wendy bringing you the blog today, I really hope you’ve had a lovely weekend and are braced for the week ahead.

Today I’m bringing you a light touch tutorial and Friday will be a full tutorial

I just love this gingerbread family and I liked the die as parts could be easily separated

To begin with I cut my base card from white pearlescent card measuring 9” x approx. 4”. I then cut the ‘Circle windows’ Slimline’ in green pearlescent card and attached to my based card worth 1mm foam pads. I only did this around the edge so that I had enough room to slot the gingerbread family in.

Next I cut out small 3 elements of the gingerbread family and their component parts. I assembled and added some white stitching using a gel pen for effect.  /i also did this around the card

Next I added the family to the card, starting with the child at the top, mummy in the middle and daddy at the bottom. Here are some close ups for you

I had a wonderful die from a few years ago with I really wanted to play with which was the ‘Handmade cookies 2’. I thought they were a perfect match for my card so I cut out the base in fawn Bazzill card and then overlayed with white pearlescent card. I then scattered these about on the card when they looked grounded.

To finish off, I added some white gelato to make the gingerbread and the card look like it had flour / icing sugar on it. I think this really worked with the theme

I really hope you like the card today. I had such fun making it and I hope it inspires you to start making your Christmas cards

Have a a wonderful week and I will see you Friday for a full tutorial

Wendy

Dies I have used

Forest Friends

 Hi everyone welcome to another Monday with the Scrappin Cottage. Today I am sharing the  Windows Slimline card using the newly released Christmas Van w/Bear and Woodland Christmas set.

I used speciality papers to create the van and added the diecut piece to the bottom window on my slimline card

You can see how shiny it is in the image below

I next used craft colored paper to diecut the woodland deer and decided to leave it as it 

and adhered it in the second frame. 

The top window I colored the trees with my copics and used some white glitter paper to give a look of snow to the Forest Friends Border die (as seen below)

I glued the piece to a piece of white cardstock and this completed my card for today.

December Calendar Mini Page With Gingerbread Die Cut Family

Happy Sunday Scrapping Cottage friends! Melinda here with you today. First things first.... Did you remember to "fall back" today? I hope that extra hour means you get an extra hour of crafty time!!!!

Today I am sharing a cute December calendar I made featuring the gingerbread family die set along with a few elements from a couple other dies! They are all part of the fantastic Christmas Release #2.  Now is the perfect time to pick them up! They are 30% off! 

Here is a look at my project.

It is a fun December calendar page. The finished size is 7 x 7.

I will be creating a December Daily type project this year. I started off with this page.

For the base of the project, I started with a piece of 7x7 green cardstock. I then cut a white cardstock mat at 6.75 x 6.75. I then used an "ancient" MS border punch in my stash for the border.

To that I added a mat of some patterned paper I created. I cut that at 5.5 x 5.5. I added some flat back pearl strands to that border. 

Here's a closer look at some of the elements at the bottom of the layout.

Here you can see the cute girly gingerbread. You can also see the cute candy canes and the darling bow. The candy canes are from the Marshmallow Guys die cut. I colored them with my red marker and then added a little red stickles to give it a little extra. The double bow comes from the beautiful Ice Skates die. I love that you can easily mix and match pieces from the various dies!

To the top right corner, I added this pretty little stitched Cardinal with some holly leaves and berries. I added a touch of stickles to the berries for an extra touch. The photo doesn't show the sparkle to well though. 

Here's a closer look at the cute little gingerbread child and father. They are so cute and pretty easy to put together.

Here is one last look at my spread. I created the monthly calendar and then sized it down and printed it.

I haven't decided if I am going to add this to a little mini album or which way I am going to combine them. So STAY TUNED as next week I will be sharing more of my pages!

The Dies I used to create these projects:

Gingerbread Family

Christmas Smores

Woodland Christmas Set

Well that about covers it for today! 

The CottageCutz YouTube channel is up and running. We are featuring videos every Wednesday. Drop by and subscribe so you don't miss one and give us a thumbs up on our videos.

Make sure to come back by each day for some more great crafty inspiration from the super talented team. Don't forget to head over and take advantage of the great savings on these and more of the fabulous Sale!

Be sure to head over and check out the fantastic

CHRISTMAS PART 2 RELEASE!!!!

SOME AMAZINGLY CUTE DIES! 

This release has the Merry Christmas with Shadow die.

CHRISTMAS PART 1 RELEASE!!!!

SOME MORE AMAZINGLY CUTE DIES! 

COTTAGECUTZ.COM

Until the next time, have a wonderfully crafty day!