Little Chapel in the Woods

Good Morning Friends!

It is Pam sharing with you today!
There are so many wonderful back roads in South Carolina that are just full of gorgeous scenery.  Almost on a daily basis you can see deer.  And it is guaranteed that no matter how far off the beaten path you will always find a small church.  That was my inspiration for this card!

Design Steps:

 1.  Cut a dark brown frame using the largest Pierced Wide Rectangle Frame Set.  Use a piece of green and blue DP for the grass and sky glue behind the frame. Die cut the mountains using the Snowcapped Mountains die.  Glue as shown.  Cut the path free hand out of light brown card stock and glue down

2.  Cut out trees using Rustic Sign & Trees die.  Use green and dark brown card stock to make the cut.  Using Woodland Fawns die cut out 2 fawn one light and one dark brown.  Use the Little Chapel die and cut out the chapel with vanilla card stock.  Assemble all die cuts

3.  Mount frame to the front of the card.  Place a small piece of yellow behind the little chapel and then glue to card.  Put the largest tree on the left and the smaller tree on the right and then add the fawn

Cottage Cutz Products:

I hope you enjoyed looking at my card today!  It is one of my favorites!

Blessings

Pam

Mountain lodge

Hi, Janja here!

If you are an avid hiker, then the season to visit hills and mountains is here.
So today one card for lovers of hiking and mountaineering.

Supplies:
- CottageCutz dies: Mountain Lodge, Rustic Sign & Trees, Moose & Trees, Birch Trees & Deer
- white card base: 6 x 6" (15,2 x 15,2 cm), folded
- patterned paper: 5.5 x 5.5" (14 x 14 cm)
- white and colored cardstock
- Distress ink pads: Peeled Paint, Aged Mahogany, Vintage Photo, Hickory Smoke
- Distress oxide pads: Peeled Paint, Vintage Photo

Trim white cardstock for the card base and patterned paper for background. With scissors cut out green paper below.

From colored cardstock cut out all pieces with dies that we need for the mountain lodge. Also cut out the largest element of lodge from fun foam. Distress all pieces with Distress ink pads and assemble them into a whole.

Also prepare some spruces, birch trees and deer cutouts.

When we have everything cut out, start by assembling the card.
First paste green paper on blue background. Directly on the background fasten spruces and birch trees.
Fix the mountain lodge and remaining two spruces with adhesive foam tape.
Finally, we add a deer.

I hope you've enjoyed this project. 

Thank you for coming over and have a lovely day.

Great Outdoors

Good Morning My Scrapping Cottage Friends!

It is Pam sharing with you on this beautiful Thursday! I am showing you a Dad's Day card that has 4 folds.  It should really appeal to all those dad's that love to go camping and appreciate the beauty that our great outdoors has to offer!

1.  Start with a  5 1/2 x 12 inch piece of brown card stock.  Score at 1 1/2, 2 3/4, 5 1/4 and 7 3/4

next cut your designer paper slightly smaller than the score lines for each panel.

2.  Glue the designer paper to the card as shown below

3.  Using Cottage Cutz dies Rustic Sign and Trees, Woodland Fawns and Spring Grass cut out the sign, grass, fawn and bunny. Assemble the pieces and ink for dimension

4.  On the back panel cut a free hand rolling hill for the backdrop glue it down first add the trees, fawn and grass

5.  On the third panel from the front cut a free hand rolling hill and glue down first add the tree, the bunny and the grass

6.  On the very front panel add a free hand cut hill and the sign and finally the grass

7.  Type up your sentiment and print on cream colored paper add Dad to the sign and your sentiment to the forth panel

Cottage Cutz Products

I hope you give your dad a big hug and make him a very cute Father's Day card!

Blessings

Pam

Woodland Box Card

Good Morning Scrapping Cottage Fans!

It is Pam sharing with you today!  I really love the Cottage Cutz dies. They are extremely detailed and make such sharp wonderful cuts!  I love to create little scenes so I am sharing a A2 size box card with you today.

Here are my design steps:

Start with a 5 1/2 x 9 inch piece of kraft card stock.  Score with paper placed horizontally on the scoreboard at 2 1/8, 4 1/4, 6 3/8, and 8 1/2.  Then flip card stock vertically on the scoreboard and score at 2 3/4

 On the top half of the card cut down to the center line and stop. On the bottom half on the 1/2 inch score line make a diagonal cut all the way to the top and remove that piece as shown

Green mats (2 Pieces) 2 x 5 3/8 glue the mats to the card closest to the 1/2 flap on the front and the back. These pieces of the box will not bend

Cut the green mats for the rest of the box (9 pieces) 2 x 2 5/8. Glue the green mats to the outside of the box as shown below

 Glue the rest of the green mats to the inside of the box as shown below. The bottom that is not covered is the inside of the box which will not be seen

 Cut one piece with white card stock 1 7/8 x 5 1/4 for the outside of the box and glue down.  This is where you will stamp your sentiment and sign your name. You should do your stamping and signing now because it is much easy at this point

 Cut one piece of designer paper 1 7/8 x 5 1/4 for the inside of the box and glue down

 Cut designer paper (3 pieces) 1 7/8 x 2 1/2 glue to the inside of the box

 Cut different designer paper (6 pieces) 1 7/8 x 2 1/2 glue to the outside of the box

 Using a sturdy tape place several pieces of tape to the small flap and close up the box.  Make sure that you have the side of all the rectangles covered with designer paper on the outside of the box

 Cut (2 pieces) of kraft card stock 3 x 1 score them on each end 1/2.  Fold them and add sturdy tape to each folded end as shown below

 Place the first brace toward the front of the box as show making sure to really press down the tape

 Place the second brace about an 1 1/4 behind the first brace as shown

Using the following dies: Rustic Sign and Trees for the big darker green tree and bunny, Woodland Cabin for the ground, trees in the background, Garden Accessories for the fence, vines, and flowers, -Seasons Greetings for the deer, Thanks for the sentiment.  I inked many of the pieces for some added depth.

 To begin assembling I glued down 4 pieces of ground for all of the braces and the front and back, then the background trees, added the dark green tree and the deer to the back brace, next I added the fence to the front brace, the bunny and all of the yellow tulips and last I added the vine with the red flowers.

For the final touch I added the Thanks and the raffia bow!

I hope you enjoyed looking at this little woodland scene!  It was really fun to create. Give it to someone special. They will love receiving this awesome surprise!

Blessings
Pam