Snow Buddies

Happy Friday!  It's one week until Christmas!  Do you have all your holiday cards finished?  I am almost done with mine, just a few more to go.  My card for you this week uses a die from the Christmas Part 3 release.  Although it makes an adorable Christmas card, it also makes for a wonderful friendship or birthday card.  I've made a friendship card this week.

 This card went together quickly at least in part because I used a pre-printed card base.

This pre-printed card is leftover from a kit that I got this summer.  I also cut a white panel 4 1/4 x 3 inches.

I cut a hill from the white panel and used a product called Cosmic Shimmer Glitter Kiss to give the hill a frosty edge.  I stamped the sentiments in the lower left and set the hill aside to dry.  The ink I used is oil based and takes while to dry as does the Shimmer Glitter Kiss.

All my penguin pieces are cut from white (except the hats) and colored with Copic markers and Stampin' Blends.  I assembled them before putting them on the card.

After what I thought was enough drying time, I glued the hill to the card front.  I say "thought" because as you can see, my sentiment smeared!

Recovering from accidents like this can be challenging.  Here I decided to heat emboss the sentiment in white and cut out a strip for the portion above "snow Buddy."  I cut the sides at an angle on purpose to give it a more casual feel.  I popped up the penguins using foam dots.

 This card seemed to ask for a little more so I added a few snowflake sequins!

Dies used:

 Thanks for visiting today!  I hope you have a fun and creative weekend.

Holy Nativity

Good Morning Scrapping Cottage Friends,

Only a few more days until we can celebrate my favorite holiday!  I am all finished making my cards but I thought there is always some surprises last minute. So that is why I thought I would make a few more just in case.   And if I don't use them this year I have a head start for next year!

I am using one of the most beautifully detailed dies today and it is the true meaning of Christmas. The die is The Holy Nativity die.  This is a fancy fold card called Tent Topper.  There is a great tutorial for this card on Splitcoaststamper.  

Design Steps:

1.  White card base 4 1/4 x 8 folded in half.  Copper card stock 4 1/8 x 4, Navy DP 4 x 3 3/4

2.  Glue the Navy DP to the copper card stock then add your white square knotted ribbon.  Glue to the white card base

3.  Use your Holy Nativity die and cut it out using a piece of copper card stock.  Using the same navy DP line the back of the Nativity scene with the DP as shown

4.  Next lay your white card base on you cutting tool our just use a ruler to line up where you are going to place the topper.  Making sure it is just slightly smaller then 5 1/2 so you can use an A2 envelope.  Glue the top in place and your card is complete

I hope you are just about done with your cards!  Now I am on to shopping for family and friends!

Blessings

Pam

Joy

Hello!  This is Sukie and today I have another Christmas card to share.  For this card, I went for a clean and simple (CAS) design which is a challenge since it's all about the details for me.

I cut out the Joy Snowman from card stock using the packaging as a guide for the colors.  I also selected a light blue patterned paper for the base of my card along with some basic white card stock.

The white card stock was embossed with the Cuttlebug D'vine Swirls embossing folder.

Next, the embossed panel was affixed to the lower half of my card base creating a striking contrast between the 2 portions of my card.

I visually looked for the center point of my card and adhered the cute snowman on the upper portion of my card.

The letter "Y" was placed on the right side of the snowman nestled closely to the snowman.

The letter "J" was adhered on the left side of the snowman, completing the "Joy" sentiment.

This card came together quickly and can be mass produced for those last minute Christmas cards.

Here is the die set used on my card, available in the store:

Have a Wild Birthday!

Hello!  This is Sukie and today I'm sharing a fun and festive birthday card.  I took a break from creating Christmas cards and used one of the new die sets from the Safari die release for this card.

The Safari Peekers were perfect for tucking inside the Stitched Wide Rectangle Frame.  The frame coordinated perfectly with the patterned leaf paper.  Once the animals were nestled inside the frame, I used the Party Elephant die set to cut out the bouquet of balloons and the party hats.  The party hats were added to the lion and monkey.  The finishing accent on my card was the sentiment.

Here are the die sets used on my card, available in the store:

Christmas Cookie

Hi!

It's Anja here. I have another Christmas card for you today. This time is all about baking. 

 For this card I used:

- Cottage Cutz dies (Gingerbread Baker, Sweet as a Christmas Cookie),

- Distress Inks and Oxides,

- white card base (10x21 cm),

- white card stock for die cuts,

- black pen,

- white pen,

- water spritzer,

- heat gun,

- adhesive foam pads,

- paper glue. 

First I cut and colored gingerbread cookie.

Next I did the same with the sentiment.

Then I used Distress Oxides and did the background. I colored directly on the card base.

After coloring I spritzed over the paper and dried it with the heat gun.

And after that I glued all the pieces to the card base. I adhered the gingerbread cookie with the adhesive foam pads. And my card was done.

That's all from me for today. Have a nice week and see you again next Sunday.

Anja Z.

Cottage Cutz dies I used for this card:

Snowman in the Meadow

Hello Scrapping Cottage friends! Thanks for taking the time to stop and visit with us today. It's Mary Marsh here bringing you the Saturday edition of the Blog.

Our Christmas dies are still available in the online store. And, there is still time to get some to create this year's Christmas cards.  We have Christmas Part 1 (22 new designs), Christmas Part 2 (21 new designs) and Christmas Part 3 (11 new designs). 

Today, for your viewing pleasure I have a card featuring the new Snowman & Owl Pal die. It's one of those whimsical dies from the Christmas Part 3 collection that makes for a really cute Christmas card. I created it for a friend who lives out in Washington. They don't get much snow so I thought a snowman card would be a cute one for her. Let's get started on some details of how I created my card.

Design Steps:

My card this week started with the color challenge #821 on Splitcoaststampers. The colors were limiting but the optional item was to make a snowman. We have so many really cute snowman dies this year so I knew I was in for the challenge. Our colors were bermuda bay, silver and pumpkin pie. Neutrals are allowed in this challenge and I used black, white and a few shades of brown . 

pumpkin pie, silver, bermuda bay

I managed to find some scraps of bermuda bay designer paper to use for the snowman's jacket and the owls hat. That made things a little easier. Then I used bermuda bay cardstock for his scarf, buttons, hat band and pockets.  

For the background, I embossed with a snowflake swirl embossing folder.  I like the visual interest it gave to my card. 

I cut a snow slope and used chunky glitter on the top of the slope. Stamped my sentiment in bermuda bay ink.  

I am ready to start card assembly. I attached the embossed panel with double sided tape and the snow slope with dimensional adhesive.

 

Next, I added the snowman image using dimensional adhesive. I cut some silver snowflakes from an older CottageCutz die(Cocoa & Sweet Treats) for added interest on the embossed panel. 

And, that completes my card for this week. I hope you are making progress on your Christmas cards. I have my cards out in the mail. Now I am ready to bake and make some candy for gift giving. See you next Saturday. 

die I used to create card: