Birthday Gift Card!

Hello Scrapping Cottage Fans!

It is Pam from Stamper at Heart Blog Spot

I know now a days that so many young people like gift cards.  And it really takes all the thrill out of hunting for the perfect gift!  However it is a lot easier and faster to get the gift card.  So to make it a little more personal I decided to make the gift card holder!

Designer steps:

1.  Start with a 4 1/8 x 9 3/4 piece of white card stock.  Score at 2 1/8, 5, 6 and 7.  Fold as shown this is the inside of the gift card

 2.  Flip the card over and glue the mountain fold (which is now the vally fold) together.  Then flip the card back over

 3.  Cut 4 pieces of DP at 4 x 2 3/4 and cut 2 pieces at 2 x 4.  Working on the inside of the card glue one of the 4 x 2 3/4 down as shown

 4.  On the inside glue the flap for the card holder down with a tiny lines of glue on both of the far left and right edges and then push it down onto the DP

 5.  Still working on the inside glue the 2 x 4 inch DP to the top flap and glue the 2 3/4 x 4 piece of DP to the bottom half of the gift card

 6.  Flip the card over and glue down the DP to the front of the card

7.  Next cut out the cupcake using the  Cottage Cutz Stitched Cupcake die also using Cottage Cutz Celebrate die cut out the sentiment.   Assemble the pieces

8.  Glue to the front flap as shown

 9.  Flip the card over and add a sentiment just below the pocket for the gift card and add a small velcro dot for secure closing

Cottage Cutz Products

I hope you give this project a try!  It is very versatile!  I use it for weddings, baby showers, and of course Christmas!

* Just a note we are moving to a larger warehouse so ordering will be set to start on Sept. 20th

Thanks for stopping by!
Blessings
Pam

Haunted Mansion

Hi, Lois here.  I hope you are enjoying this long Labor Day weekend.  Now that September has arrived, Halloween is just around the corner.  CottageCutz has some new, really cute Halloween dies.  My card today uses one of them, as well as a couple of older dies.  The name of the Halloween die brings memories of many trips to Disney World -- Haunted Mansion.

I usually start a card by cutting the card base and mats, but this was Halloween -- why not mix it up!  This die has many small pieces to it.  I first ran the die through my Big Shot using gray cardstock.  I was able to color many of the gray pieces with various Copic markers.  Some pieces, like the ghost and the insides of the windows had to be cut from white cardstock because the gray was too dark.

So now I was ready to gather my card base pieces.  I have an old patterned paper pad made up of photographs.  One of the photos is of a dark night sky.  That's the one I used for my spooky house.

I cut a strip of the green to form the ground and constructed my card base.  You can just about see the outlines of the spooky-looking trees in the background.

I decided  to use the photo on the die packaging as a guide for constructing my house.  And the jack-o-lantern is from the Calendar Icons die.  I placed a small piece of yellow cardstock behind his face.

Now I was ready to complete my card.  The trees are from another CottageCutz die called Campsite Clothesline.   And don't look too closely -- I forgot to include the spider webs on the front of the house.  It was too late when I discovered that!  But I did stamp a small sentiment and placed it on a "sign" in front of my house.

The Haunted Mansion die, as well as other Halloween dies and several new series of Christmas dies, will be available for purchase in the CottageCutz store starting September 20th.  Because of the support of our wonderful customers, it has become necessary to move into a larger warehouse.  Because of the move, the store is temporarily on hold.  But that gives you lots of time to decide what you want next!  LOL!

CottageCutz dies used on my card are:

Baked with Love

Hi!
This is Anja again. My colleague asked me to make her a card for her friend who loves to bake. And this is what I came up with. I played with embossing and Distress Oxides.

I used:
- Cottage Cutz dies (Tiered Wedding Cake, Baking In The Kitchen, Nested Stitched Scallop Circle Set, Nested Stitched Doily Set),
- Distress Oxides (Antique Linen, Abandoned Coral, Vintage Photo),
- transparent embossing powder,
- Versamark embossing ink,
- watercolor paper (10,7x14,7 cm),
- white card base (11x15 cm),
- paper glue,
- enamel dot,
- Wink of Stella glitter brush pen.

First I stamped the images on watercolor paper. I used the stamping platform to make it easier. I embossed the images with transparent embossing powder.

I colored the images with water and Distress Oxides. I spritzed a few drops of color all over the paper at the end. I used the same technique to color the cake.

I decided to stamp the sentiment directly on the cake.

Then I die cut two different circles that combine each other nicely.

And after that I just combined and glued all the pieces together. I added a little glitter with Wink of Stella marker to the cake and colored images on the background.

Have a fun filled Sunday.
Anja Z.

Grapevine Wreath Thanksgiving Card

Hello Scrapping Cottage friends! Thanks for taking the time to stop and visit today. It's Mary Marsh here bringing you the Saturday edition of the Blog.

I can't believe we are into September already. Today there is a chill in the air that makes it feel just like a fall day. The temperatures will rise again for sure this month, but today I am thinking fall. And, with fall comes one of my favorite holidays, and that would be Thanksgiving.

I pulled out an older CottageCutz die, Build-A-Grapevine Wreath, to create my card. Also used the Blessings Phrase. So let's get started with some details on how I created my card.

Step 1: Once my dies were selected, I chose my card colors. The fall colors I am using are chocolate chip, curry, cajun (cinnamon color), olive green.

Step 2: Cut the grapevine wreath, leaves and acorns on this next step. I cut the wreath 2x in chocolate chip cardstock. I did that for a bit more dimension. Sponged the leaves with the matching inks. The acorn tops I sponged in chocolate chip ink.

Step 3: I wanted a wood background for the wreath. I used a wood planks embossing folder with kraft cardstock and then sponged on the cajun ink.

 

 Step 4: Cut the Blessings Phrase in chocolate chip ink. Again I cut it 2x. I like the dimension that 2 cuts gives my card. I adhered the 2 pieces together using multi medium matte by Ranger.  I like this adhesive because it dries clear.

Started the assembly of my card. Adhered all the pieces of the grapevine wreath using the same multi medium matte adhesive. I wanted a more weathered look on the wood plank background so I sponged on some curry ink.

 

Added the Blessings Phrase. I adhered this panel to some cajun cardstock.

Image Panel Size: 3 7/8" x 5 1/8"

Cajun Cardstock Panel: 4 1/8" x 5 3/8"

Step 5: To complete my card,  I stamped the Harvest word on Cajun cardstock in black ink and cut a flag shape. Used some curry bakers twine and made a bow for my wreath. Added a Cajun enamel dot to the center. I layered the panels to my chocolate chip card base. The base is 4 1/4" x 5 1/2" (A2 size) 

Well friends that's my card for this week. I hope I have given you some inspiration on a way to use the Blessings Phrase for a Thanksgiving card. See you all next Saturday.

Dies I used to complete card:

 

 

 

One Sip at a Time

Good morning!  It's Jeanne here today.  I hope you all had a great week and are looking forward to the long weekend.  One extra day to craft!  September always puts me in the mood for fall (even though technically it doesn't start for a few weeks and it was in the 90s today!) so today's card has some fall colors.

This card features the adorable Mr Snuggles die along with the Cup of Latte die and new Nested Stitched Eyelet Rectangle Set.

My card base was cut from dark brown cardstock to 4 1/4 x 11 and scored at the 5 1/2 inch mark to make a top folding A2 card.  I used vanilla cardstock for the front panel and cut it to 4 x 5 1/4.  I die cut a panel from the plaid paper using the largest of the Stitched Eyelet dies and I cut a panel of the striped paper 3/4 x 5 1/4 inches.

I used a sponge dauber and distress ink to color the sides of the bear and cup.  Then I cut the "latte" and steam from the same striped paper. His eyes are colored in with a multi-liner pen.  I love that you can move Mr Snuggles arms to pose him various ways!

After I glued the striped panel to the front I distressed the edges with Antique Linen Distress Ink.  I also distressed the edges of the plaid panel.  I used ribbon to mimic the plaid pattern on the front panel,

and I added the sentiment underneath.  The sentiment is embossed in copper on dark brown cardstock cut to 1/2 x 4 inches for the sentiment.

When all the panel elements were glued down, I adhered it to the card with foam strips.  I then added the bear and cup with foam dots.

Thanks for stopping by today - I hope you have time this long weekend to be creative!

Dies used: