Shaker Tag Gift Card Ornaments

Merry Christmas CottageCutz friends!  I hope you had a wonderful holiday with your loved ones. 

Kris here sharing with you today.  I know most of you are done making Christmas projects now, so maybe you want to save this idea for next year's gifts... OR you can always change the theme and use these for gift bag tags (thinking Valentine's... Birthdays...any special occasion!) ☺  

I'm a huge fan of shakers, so I made 2 ornaments that are shaker tags with gift card holders on the back, using the Jolly Santa Gnome from the Christmas 1 Release & I made the other with the Polar Bear Trio with Igloo from the Christmas 2 Release.  

The patterned papers and tiny tags are from 

Winter Wonderland (Polar Bears Tag) and 

 Let it Snow (Jolly Santa Gnome) from Doodlebug Designs

JOLLY SANTA GNOME TAG

White Cardstock:

• cut 5-1/2" x 3-3/4"

• die cut Jolly Santa Gnome

Red Cardstock (back of tag):

• die cut Merry Christmas Ribbon

Acetate/Window Sheet:

• 3-1/2" x 4-1/4"

Patterned Paper #1 (red with Santas):

• 5-1/2" x 3-3/4"

Patterned paper #2 (green trees):

• 3-3/4" x 3" - then cut the top with a Hills Slimline die

Patterned Paper (tiny tags):

• cut apart one of the tiny tags and punch hole where indicated

HOW TO:

1.  Glue patterned paper #2 to the bottom of patterned paper #1.

2.  Measure along the TOP of the patterned paper #1 and make pencil marks at 3/4", 1-7/8" and 3"

3.  From the TOP, measure down each SIDE and place a mark at 1-1/4"

4.  Make a diagonal cut from the TOP 3/4" marks down to the 1-1/4" SIDE marks.

5.  Punch a hole about 1/2" down from the center (your 1-7/8" mark)

6.  Place that tag over your white piece and use as a guide to cut the corners off of white tag and punch hole in middle. 

7.  Using a rectangle die, (I used the 3rd largest of the Nested Wacky Stitched Rectangles) center it over your Patterned Paper tag and cut.

8.  Turn that tag onto back side and place Scor Tape (or other strong double sided adhesive) close to the rectangle cut-out.  Attach your window sheet.

9.  Add foam strips/tape just outside the rectangle and around edges of tag.  (See photo below)

10.  Add sequins/shaker elements.

11.  Carefully place your WHITE TAG on top, lining up edges and the hole at top.

12.  Color your Jolly Santa Gnome and attach to tag front using foam tape for dimension. 

*Optional (but highly suggested):  Add Snow Writer (puffy snow, etc) to the trim on his hat & coat!  LOVE the dimension it gives 😊

13.  Glue the red Merry Christmas Ribbon to back of tag.

*Optional:  Add a pocket to the back for a gift card!

POLAR BEAR TRIO WITH IGLOO TAG

Same cutting measurements as the Santa tag with the following exceptions:

• the 2nd patterned paper I glued to the top of the white tag (inside shaker, instead of the front & cut the bottom with the hills die)

• I used the 2nd largest Nested Wacky Stitched Rectangle (larger than the one on Santa shaker)

• I die cut a large snowflake from the Snowflake Set

• I die cut Merry Christmas w/ Snowflakes (for back of tag) from purple cardstock

How CUTE are these?!!  

♥ these adorable CottageCutz dies!

They are for my girls, so here they are on the tree ☺

Merry Christmas to you all, and wishing you all the crafty goodness in 2023!

~Kristine

PRODUCTS USED:

Snowy Village Holiday Tags

Hey Krafty Friends, Jen from Katahdin Krafts, back with another  CottageCutz YouTube video on the CottageCutz Channel.  This week I changed up my project with these elegant holiday tags.  I used both the "Snowy Village Buildings" and "Snowy Village Accessories" dies from the Christmas release for my tags.  

These tags add a personalized touch to your packages and do not take a ton of time making them.  You could easily make an "assembly" line while watching a sweet holiday movie, being both creative and productive!

You can find all my layout instructions over on the YouTube Channel!

While over on the channel, make sure you like and comment for a chance to win the "Snowy Village Buildings" die!

The winner of the "Rustic Winter Window" die from my last video is Susie A, the details for collecting your giveaway prize are over on YouTube!  

Thanks for stopping in, and have a wonder holiday season, I will see you in the New Year!

Frosty Friends

Hello Crafty Friends!

It is Pam sharing with you today! Merry Christmas to all!

Well only 4 days left until the big day of celebration!! And of course I am getting a last minute gift ready.  And what is a gift without a handmade card!  So this is the last card of the season.  I used the Happy Reindeer and Snowman.

Design Steps:

1.  Using the Happy Reindeer and Snowman die cut out the following pieces of card stock:  brown, red dotted DP, green, black, orange, dark brown, and white.  Shade the edges with coordinating inks and a small applicator.  Assemble the pieces with a fine tip glue

2.  Use a white A2 card base, cut red dotted DP 4 18, 5 3/8, cut a piece of reindeer DP 4 3/4 x 3 1/2 (using the 3rd from the largest Pierced Oval die cut the oval in the center of this reindeer DP) and finally cut a piece of white 4 1/2 x 3 1/4 and sponge or brush with blue ink

3.  Glue the red dotted DP to the white card base, next glue down the blue inked card stock to the center of the red dotted paper.  On the back of the reindeer paper add dimension tape and then pop it over the blue inked paper

4.  Add the snow to the bottom of the oval and then glue down the reindeer and snowman.  Add the bow and your sentiment and your card is complete

CottageCutz Products

We have more inspiration on our YouTube Channel check it out HERE

Thanks so much for stopping by!  And I will see you next Thursday.

Blessings and Take Care

Easy Snowman Tag

Happy Tuesday Cottage Cutz Friends!

Melinda here with you, and today I am sharing a very easy tag for a present I created with the adorable Snowman w/Tree Die from  from this year's amazing Christmas release! As we get down to the wire and finish wrapping all of those presents, here is a very quick and easy tag solution that you can get done fairly quickly!

To create my cute and very simple tag, I used the second largest double stitched rectangle die from that set for my base. I cut it out of plain white cardstock. I then proceeded to cut a piece of patterned paper for the background mat. 

I then cut out the adorable snowman die in white cardstock. I colored the various pieces with my markers. and assembled them and put them onto the mat. I added some puff paint for the snow, the brim of the hat and the ball. I also added some of that same paint onto the tree too.

Next, I cut out the Merry and Christmas from the Tree die set. I colored in the pieces with my pink markers. 

Lastly, I took the second smallest stitched scalloped rectangle from the die set to make my to and from tag. I stuck all of that onto the double stitched mat. To finish off my gift, I wrapped the center in some pretty ribbon. I adhered the finished tag over the ribbon. I hand wrote the To and From on the tag. For a little extra touch,  I added a cute snow flake charm to the corner.

Here's a closer look at my finished tag. I think it turned out super cute and really makes my package look finished!

Dies I Used

Snowman w/Tree

Nested Scallop Rectangle Set

Double Stitched Rectangle Set

Merry Christmas Tree

Here's a look at the entire release. Be sure to head over and grab them while they last!

Well that about covers it for today! Until the next time, have a wonderfully craft-die day!

Melinda Beltran

New Year's Slimline Shaker

Hello crafty friends!  Wishing you a Merry Christmas this week!

Kristine here with you today and shaking it up with a slimline shaker card for New Year's using the cute Polar Bear Trio with Igloo die from the Christmas #2 Release, and the Fifties Phrases #1 die from the Classic 50's Black Friday Release and more!

Let's Party 2023

The SCS color challenge the next 2 weeks is

Basic Black

Metallic Silver
Metallic Gold

And the dessert option is:  NEW Year's

I chose a slimline paper pack called Shine Bright.that has silver and gold with subtle Snowflakes.

CUTTING & SCORING

Black Cardstock:

 • cut 8" x 9", score along the 8" side at 4"-  score & burnish

• die cut Fifties Phrases #1

Silver Metallic (or foiled) Cardstock: 

• cut 8-3/4" x 3-3/4" 

• die cut Stitched Numbers

Gold Metallic (or foiled) Cardstock:

• die cut Balloon, Round Mini

• die cut balloon from Star Windows Slimline set

Patterned Paper (Silver Snowflake): 

• cut 8-1/4" x 3-1/4" 

Patterned Paper (Gold with Snowflakes):

• die cut Star Windows Slimline

Acetate or Window Sheet: 

• cut 8-1/4" x 3-1/4"

White Cardstock:

• die cut Polar Bear Trio with Igloo

DESIGN STEPS

#1  Cut all your layers and die cut pieces.

#2  Adhere your silver layer to card front.

#3  Rub a used dryer sheet or anti-static pouch to both sides of your acetate sheet and attach to back of star cut-out layer with double-sided tape.

#4 Using foam strips, outline the edges of acetate and around the star shapes.  Peel backing off the strips and add shaker elements inside your 3 sections.

#5  With your silver snowflake paper, pattern side down, carefully center it over your star layer, matching up the edges best you can and adhere.

#6  Turn shaker layer right side up and attach to card front.

#7  Color your polar bears and attach all die cut elements to card front as shown.

Wishing you all the crafty goodness in 2023!

Kristine

PRODUCTS: