Hang in There!

Happy Friday!  It's Jeanne today and I have a card of encouragement for those feeling overwhelmed by the holidays (and aren't we all feeling that way?)  This cute Santa is hanging on and I want to tell him and others "don't let go - hang in there!"

I used Copic markers and Distress Oxide inks to color the pieces of the image.  I assembled much but not all of the image.

I cut a green A2 card base, a panel 4 x 5 1/4 inches from a pine tree patterned paper, a white oval using the largest of the Nested Stitched Scalloped Oval dies, and an oval using the second largest of the Stitched Oval dies.

Using a stencil and DO ink I stenciled clouds on the Stitched Oval and stamped my sentiment close to the bottom.

Then I adhered my Santa to the oval just above the sentiment.  I knew I would need to adjust the branch so that is why I had not completely assembled the Santa before putting it on the card.

I trimmed the branch from the oval and glued it to the scalloped oval to form the medallion.

I tied a ribbon around the pine panel and added a small pine cone to the bow.  The love how this pattern is like  the tree Santa fell through!  The panel is glued to the card front.

I used foam tape and popped the medallion up off the front of the card.

The holidays can be stressful and I love how this little guy is hanging in there!

Be sure to visit the online store where the Christmas releases (Parts 1, 2 and 3) are 25% off for a limited time!

Dies used:

 Thanks for visiting today!  I hope you have a fun,relaxing and creative weekend!

Country Christmas

Good Morning Scrapping Cottage Friends,

It is Pam sharing with you on the Thursday post.

Just a reminder that our online store is featuring some beautifully detailed Christmas dies.  The dies are from Christmas Part 1 (22 designs), Christmas Part 2 (21 designs), and Christmas Part 3 (12 designs).  All of these fabulous dies are on sale right now in the store for 25% off.  Just click here to check them out.

Today,  I am working with the Farm Truck Ornament die.  I just love the country feel to this sweet little ornament.  This is a quick and easy card great for multiples!

Photo by Марьян Блан | @marjanblan on Unsplash

Design Steps:

1.  Using the Farm Truck Ornament cut it out of a deep red, using the 4th from the largest Pierced Circle die cut one out of a grey parchment paper, using the Lantern with Pine Boughs cut out 2 different green shades of card stock. I made 3 cuts to get the amount of pine boughs I needed

2.  Use an A2 grey parchment base, cut a deep red piece of card stock 4 x 5 1/4 and a piece of plaid DP 3 3/4 x 5.  Glue the red and plaid paper together then glue to the base card

4.  Glue the pierced circle to the card as shown and then glue the ornament on the top of the circle be careful to get it lined up.  Arrange the pine boughs in the upper left corner of the card

5.  To complete the card add a small ribbon to the upper left hand side of the card

CottageCutz Products

Thanks so much for stopping by today!  I hope you have time to get crafty!

Blessings

Pam

Holiday Deliciousness

Hello!  This is Sukie and I have another holiday card to share today for my design team post.  There are 3 Christmas die releases in the store with so many amazing die sets.  This card is full of Christmas cheer!

I started by cutting all of the pieces to make the adorable Gingerbread Baker using card stock. The pieces were easy to put together.  I love how he's sitting on a rolling pin with the spoon in his hand!

I found the snowflake pattern kraft card stock in my stash.  I used an oval die cut to add some white ink to the card panel. I simply held the oval in place and inked all the way around the inside of the oval.

The card base was created with layers of kraft and white card stock and then finished off with the pattered snowflake paper.

I affixed the Gingerbread Baker to the center of my card base. The soft inked oval in the background keeps the die cuts from blending into the background.

The sentiment is from the APB - This is December #2 stamp set which was heat embossed on some red card stock for a pop of color.  The cheery sentiment is definitely a fun addition!

The kraft, red and white gives this card a warm and cozy feel to it.  It's one of my favorite color combinations for holiday cards!

Here is the die set I used on my card available in the store:

Sweet Christmas Wishes

Hello!  This is Sukie and I have a slime line Christmas card to share.  Today's card features several of the new dies from the 3 Christmas die releases in the store.  

I selected some yummy treats to showcase on my card.  The die sets I used for the cupcakes include: Upside Down Santa Cupcake, Reindeer Christmas Cupcake, Gnome Cupcake and Snowman Christmas Cupcake. All of the pieces were cut from card stock, pieced together and popped up on card stock for some dimension.  I added a tiny bit of Stickles to a few of the die cut pieces.

The tiny cupcakes and gingerbreads are from the Baking Spirits Bright die set.  They were used as embellishments to highlight the heat embossed sentiment.  The sweet treats on this card all work together perfectly and make for a yummy card.

Here are the die sets used on my card, available in the store:

Christmas Joy

Hi!

It's Anja here. For today's post I made a clean and simple card in a smaller format. I replaced the snowman from Joy Snowman die with a snowman and a reindeer.

For this card I used:

- Cottage Cutz dies (Snowman & Reindeer, Joy Snowman, Nested Stitched Scallop Rectangle Set, Circle Set),

- Distress Inks and Oxides,

- white card base (10x12,5 cm),

- white card stock for die cuts,

- white pigment ink,

- black pen,

- white pen,

- acrylic block,

- snowflake stamp,

- paper glue. 

First I cut and colored the snowman, reindeer and both letters.

Next I cut a rectangle out of white card stock. I used the largest die from the set. Next I cut a circle out of the rectangle. I used the fourth largest die from the set.

I colored the night sky directly to the middle of the card base. I used Distress Oxide ink for coloring. When dry I stamped the snowflakes on the blue night sky.

When all the pieces were ready I glued it together and my card was done.

 

 

That's all from me for today. Have a nice Sunday and see you again next week. 

Anja Z.

 

Cottage Cutz dies I used:

Silly Reindeer Skiing

Hello Scrapping Cottage friends! Thanks for taking the time to stop and visit with us today. It's Mary Marsh here bringing you the Saturday edition of the Blog. 

Our Christmas dies are in the online store. And, you can still pick them up on a 25% sale. We have  Christmas Part 1 (22 new designs), Christmas Part 2 (21 new designs) and Christmas Part 3 (11 new designs). Even though Halloween is in the history books for 2020 you can still pick up the Halloween release dies (14 new designs) at a 25% savings and you will be set for next year's cardmaking. 

Today, I have for your viewing pleasure a card featuring the new Silly Reindeer Skiing die from the Christmas Part 1 release. . This die is too cute, and I thought it would be perfect for a family member who like to ski. 

But don't limit it to Christmas. It would also work for a winter birthday card or as a thank you for a Christmas gift received. So let's get started on some details of how I created my card.

Design Steps:

I knew I wanted to make a snowy scene with the reindeer, so, I looked for some background designer paper. I found this blue (pool party) paper and paired it with a white layer panel and then a red card base. I made this slightly larger than the A2 size card.

Red Card Base: 4 1/2" x 5 3/4"

White Layering Panel: 4 1/4" x 5 1/2"

designer Paper Layer: 4 1/8" x 5 3/8"

Next, I cut the reindeer in colors to match the designer paper. I used red & green cardstock because these are Christmas reindeer after all!

I cut a couple of snow slopes for the reindeer to ski down. I added some chunky white glitter to put some sparkle on the slopes. 

I attached these to the designer paper with double sided foam adhesive to lift the slopes off the background. 

Now the reindeer images are ready to be attached. I also used the double sided foam adhesive to attach. 

After I attached the snow slopes I realized I forgot to stamp my sentiment. Fortunately, The dimensional adhesive was used on the top of the slope and the bottom part was flat. I used my MISTI to stamp the sentiment in red ink and it only required one inking for a good impression. 

To finish off my card I attached the image panel to the white layer with double sided tape. Then it was attached to the red card base. I used a few red glitter enamel dots for some added interest. 

And, that's my card for this week. I hope I have given you an idea for a way to use this cute die for a Christmas card. See you next Saturday! This die is on sale at 25% off. See it in the online store here. 

die I used to create card: